Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure. Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, noncondensable gas exchanges heat with condensate from the evaporative condenser. Finally, the condensate temperature discharged from energy saver is
Main Economic and Technical Parameters of Towline Extractor (take 500T/D as an example) Steam consumption ≤ 280kg/t (soybean) Power consumption installed capacity 320KW Solvent consumption ≤ 4kg/t (No.6 solvent) Residual oil in meal ≤ 1.0% Moisture in meal 12~13% (adjustable) Solvent in meal ≤ 500ppm Urase activity 0.05-0.25 (soybean meal) Total volatile matter ≤ 0.3% Residual solvent ≤ 300ppm Mechanical impurities ≤ 0.2%
Main economic and technical parameters( take 300t soybean as an example): Capacity 30-500T/D Residual oil in meal ≤ 1% Solvent consumption ≤ 2Kg/T (No.6 solvent oil) Crude oil moisture and volatile matter ≤ 0.30% Power consumption ≤ 15KWh/T Steam consumption ≤ 280KG/T (0.8MPa) Finished meal moisture ≤ 13% (adjustable) Residual solvent in finished meal ≤300PPM
1. The neutralizing tank is used for acid for acid,alkali refining or rinse 2. The decoloring tank is for bleaching grease 3. The deodorizing tank is sued for deodotization tank 4. The conducting oil furnance provide the heating for production 5. The vacuum pump provide vacuum for bleaching , deodorization which is can reach 755mmkg
Main Processes Introduction a.Hydration Degumming & Alkali Refining Deacidification Process b.Continuous Refining Decoloring Process 1. The oil fully contacting with the decolorant can improve the decolorization efficiency and reduce the usage of decolorant; 2. The continuous and uniform material flows will balance the decoloring time and avoid the recovery of grease oxidation and acid value.
Oil refining is according to the different usage and requirements, utilizing the physical methods and chemical processes to get rid of the harmful impurities and needless substance in the crude oil, getting standard oil. The crude vegetable oil from above mentioned two ways of extracting, oil pressing and/or solvent extraction, will be pumped into oil
Edible oil refining main parts: Degumming, dehydration, deacidification, decolorization, dewaxing and deodorization. Main oil refinery equipment: degumming tank,deacidification tank,decoloring tank,deodorization tank,filter,steam generator,conduction oil furance. Neutralizing pot: for acid refining, alkali refining and washing; Decolouring pot: for bleaching the oil and removing the pigment; Deodorization pot: for remove the odour of the oil; (stainless steel) Heat-conducting
Oil press (also called oil extruder) is a machine for extracting oil from oil plant seeds. The oil seeds are supplied to the press continuously and under large pressure, edible oil is squeezed out of these materials. Raw materials Suitable Seeds: Peanut, Soybean, Rapeseed, Sesame,Sunflower seeds, Walnut, Almonds, Pumpkin seeds, Corn germ, Cashew, Camellia seeds,
Our automatic oil press machine is appropriate for many oil bearing materials, such as: peanut, soybean, sunflower, rape seed, corn, coconut, olive, etc. All kinds of oil bearing materials in plant. Furthermore, our Oil Press can be used for both cold pressing and hot pressing. Capacity ranges from 1t/d to 10t/d. Also our automatic Oil
Cold pressed black seed oil machine is the easiest operating in the mechanical oil extraction, oil yield, the replacement of wearing parts for at least a small oil press is the most advanced equipment instead of oil manual, because every time squeeze at least (2 to 7 kg / s), time is short (8-12 minutes
